Left Handle Switch - HYOSUNG Comet 250 R User Manual

LEFT HANDLE SWITCH

�
�
�
�
① ①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
② ②
" " PASS " " SWITCH
Press the "PASS"switch to operate the
head lamp high beam for using when pass.
CAUTION
Do not operate when the dimmer switch
" " position.
&
�
�
&
�
�
�
�
③ ③
DIMMER SWITCH
Change direction of head lamp light.
◉ " " : The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
◉ "
" : The head lamp low beam
come on.
WARNING
Set the dimmer switch "
vehicle is running in front or against.
④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
◉ " � " Position : Flash the left turn
◉ " � " Position : Flash the right turn
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the "OFF" position after
completing the turn or lane change.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
28
" when other
signal lamp.
signal lamp.
CAUTION