Inspection And Maintenance - HYOSUNG Comet 250 R User Manual

INSPECTION AND MAINTENANCE

TOOL
To assist you in the performance of
periodic maintenance, a tool kit is supplied
and is located under the front seat. The tool
kit consists of the following items.
NO.
1
Tool bag
2 10 × 12 mm open end wrench
3
Spark plug wrench
4
Combination screw driver
5 Screw driver handle
⑤
④
③
NAME
①
②
ENGINE OIL
Check if there is leakage from crankcase,
oil hose.
FUEL HOSE
Inspect the fuel hose for damage and fuel
leakage. If any defect are found the fuel
hose must be replaced.
Replace the fuel hose every 4 years.
GASOLINE
Check if there is leakage from fuel tank,
fuel pump, fule cock, hose, carburetor.
RUBBER CAP OF CABLES
Mop them up with a patch when washing.
EXHAUST PIPE AND MUFFLER
Inspect the exhaust pipe and muffler joint
for loosening.
52