HYOSUNG Comet 250 R User Manual page 40

5. Replace the engine oil filter
new one.
CAUTION
Insert the filter so that surface of the
filter hole turn toward the engine.
● ● OIL FILTER INSTALLATION
INSERTION
DIRECTION
HYOSUNG
16510H05240
CAUTION
When install the oil filter, necessarily,
" " HYOSUNG " "
" " 16510H05240" " part' ' s NO. install toward
the outside, otherwise can damage the
engine.
WARNING
Engine oil and exhaust pipes can be hot
enough to burn you.
Wait until the oil drain plug and exhaust
pipes are cool enough to touch with
bare hands before draining oil.
⑦
with a
LUSTER
MATERIAL
OUTSIDE
character and
WARNING
New and used oil and solvent can be
hazardous. Children and pets may be
harmed by swallowing new or used
engine oil or solvent. Continuous
contact with used engine oil has been
found to cause skin cancer in laboratory
animals. Brief contact with used oil or
solvent may irritate skin.
● ● Keep new and used oil and solvent
away from children and pets.
● ● Wear a long-sleeve shirt and
waterproof gloves.
● ● Wash with soaf if oil or solvent
contact your skin.
6. Before replacing the engine oil filter
cover, be sure to check that the engine
oil filter spring
installed correctly. Use new "O" ring
each time the engine oil filter element is
replaced.
7. Replace the oil filter cover and tighten
the nuts securely but do not over tighten
them.
8. Replace the drain plug and tighten it
securely. Pour fresh oil through the filler
hole. Approximately 1,500㎖ of oil will be
required.
Approximately 1,450㎖ ㎖ of oil must be
required when changing oil only without
replacing the oil filter.
40
④
and the "O" ring
CAUTION
⑤
are