LEFT HANDLE SWITCHES
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
CAUTION
Use the clutch correctly.
Otherwise, the clutch may be worn
quickly.
"PASS " SWITCH
Press the "PASS" switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the "ON" posi-
tion, push the "PASS" switch to operate the
head lamp high beam.
CAUTION
Do not operate when the dimmer switch
"
" position.
DIMMER SWITCH
Change the direction of the head lamp
light.
"
" : The head lamp high beam
comes on.
The high beam indicator lamp
also comes on.
"
" : The head lamp low beam
comes on.
WARNING
Set the dimmer switch "
vehicle is running in front or against.
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
"
" Position : Flash the left turn sig-
"
" Position : Flash the right turn sig-
"
" (OFF) : Pushing the "
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the "OFF" position after com-
pleting the turn or lane change.
HORN SWITCH
Press the switch to operate the horn.
Use the horn switch only in case of
need.
35
" when other
nal lamp.
nal lamp.
tion will stop the turn
signal lamp to operate.
CAUTION
CAUTION
" posi-