Left Handle Switch; Right Handle Switch - HYOSUNG GV250 User Manual

⑤ TACHOMETER
The tachometer indicates the engine speed in
revolutions per minute(r/min).
⑥ TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated either
to the right or to the left, the indicator will flash at
the same time.
⑦ NEUTRAL INDICATOR LAMP
The neutral indicator lamp will come on when
the transmission is in neutral.
The lamp will go out when you shift into any
gear other than neutral.
⑧ HIGH BEAM INDICATOR LAMP
The high beam indicator lamp will come on
when the headlamp high beam is turned on.

LEFT HANDLE SWITCH

① CLUTCH LEVER
Using to cut off dilivering power at rear wheel
when starting engine or shifting gear.
② DIMMER SWITCH
Change direction of headlamp light.
◉" " : The headlamp high beam and tail-
lamp come on.
The high beam indicator lamp also
comes on.
◉" " : The headlamp low beam and tail-
lamp come on.
WARNING
Set the dimmer switch "
vehicle is running in front or against.
③ HORN SWITCH
Press the switch to operate the horn.
④ TURN SIGNAL SWITCH
Using when left, right turn or change direction.
◉"�" Position : Flash the left turn signal
◉"�" Position : Flash the right turn signal
CAUTION
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the " OFF " position after com-
pleting the turn or lane change.

RIGHT HANDLE SWITCH

10
" when other
lamp.
lamp.