Left Handle Switch; Clutch Lever; “Pass ” Switch; Dimmer Switch - HYOSUNG GV 650 EFI Owner's Manual

Table of Contents

Advertisement

CAUTION
Riding the motorcycle with the LCD dis-
play panel indicating a problem with fuel
injection system and with "FI" check
lamp lit can damage the engine and
transmission.
Whenever the "FI" check lamp is lit and
the display panel indicates "FI" have
your authorized Hyosung dealer or a
qualified mechanic inspect the fuel
injection system as soon as possible.
N O T E
If the LCD display panel indicates "FI"
letters and speedometer alternately, and
the "FI" check lamp comes on and
remains lit, keep the engine running and
bring your motorcycle to an authorized
Hyosung dealer.
If the engine stalls, try restarting the
engine after turning the ignition switch
off and on.
When the LCD display panel ⑩
"CHE", make sure that the engine stop switch
is in the "
" position.
If the LCD display panel still indicates "CHE"
after above procedure, inspect the ignition fuse
and connection of lead wire couplers.

CLUTCH LEVER

The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
"PASS " SWITCH
Press the "PASS" switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the "ON" posi-
tion, push the "PASS" switch to operate the
head lamp high beam.
indicates
Do not operate when the dimmer switch
"

DIMMER SWITCH

Change the direction of head lamp light.
◉ "
◉ "
24

LEFT HANDLE SWITCH

CAUTION
" position.
" : The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
" : The head lamp low beam
come on.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gv650 fiAquila 650 fi

Table of Contents