Left Handle Switch; Clutch Lever; "Pass" Switch; Dimmer Switch - HYOSUNG GT250 FI Owner's Manual

LEFT HANDLE SWITCH

�
�
�
① ①

CLUTCH LEVER

The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
② ②
"PASS " SWITCH
Press the "PASS"switch to operate the
head lamp high beam for using when pass.
CAUTION
Do not operate when the dimmer switch
" " position.
③ ③

DIMMER SWITCH

Change direction of head lamp light.
◉ "
" : The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
◉ "
" : The head lamp low beam
come on.
�
�
Set the dimmer switch "
vehicle is running in front or against.
④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
◉ " �
" Position : Flash the left turn
◉ " �
" Position : Flash the right turn
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the "OFF" position after
completing the turn or lane change.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
27
WARNING
" when other
signal lamp.
signal lamp.
CAUTION