HYOSUNG Comet 250 R User Manual page 25

To reset the trip meter to zero, push the
switch ⑨ (in the normal mode) for 2
seconds while the display indicates trip
meter B or B you want to reset.
A B
WARNING
Operating the display while riding can
be hazardous. Removing a hand from
the handlebars can reduce your ability
to control the motorcycle.
Always keep both hands on the
handlebars while riding.
Mode Switch
Normal
Select (⑧)
Reset (⑨)
Clock
reset
Select (⑧)
mode
Select (⑧)
CLOCK ADJUSTMENT
Push it for
2 seconds
0.6 ~ 1 seconds
0.6 ~ 1 seconds
2 seconds
25
⑦ ⑦
CLOCK
The clock indicates 12-hour mode.
Follow the procedure below to adjust the
clock.
1. Push the switch ⑧ (in the normal
mode) for 2 seconds until the hour and
minutes display blink.
1. It is the clock reset mode.
2. Adjust the hour display by pushing the
switch ⑨ (in the clock reset mode) for
0.6 ~ 1 seconds.
3. Adjust the minutes display by pushing
the switch ⑧ (in the clock reset mode)
for 0.6 ~ 1 seconds.
4. Push the switch ⑧ for 2 seconds to
resume in the normal mode.
Adjustment
Normal mode → Clock reset mode
Increase the hour of clock
Increase the minutes of clock
Clock reset mode → Normal mode