Left Handle Switch; Right Handle Switch - HYOSUNG Aquila Owner's Manual

The lamp will go out when you shift into any
gear other than neutral.
HIGH BEAM INDICATOR LAMP
The high beam indicator lamp will come on
when the headlamp high beam is turned on.

LEFT HANDLE SWITCH

CLUTCH LEVER
Using to cut off dilivering power at rear wheel
when starting engine or shifting gear.
DIMMER SWITCH
Change direction of headlamp light.
◉
: The headlamp high beam and tail-
lamp come on.
The high beam indicator lamp also
comes on.
◉
: The headlamp low beam and tail-
lamp come on.
WARNING
Set the dimmer switch
vehicle is running in front or against.
Press the switch to operate the horn.
Using when left, right turn or change direction.
◉ � Position : Flash the left turn signal
◉ � Position : Flash the right turn signal
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the OFF position after com-
pleting the turn or lane change.
The front brake is applied by squeezing the
brake lever gently toward the throttle grip.
Front brake be anxious about motorcycle falling
down when braking suddenly as disk brake sys-
when other
tem. The brake lamp will come on when the
lever is squeezed.
10
HORN SWITCH
TURN SIGNAL SWITCH
lamp.
lamp.
CAUTION

RIGHT HANDLE SWITCH

FRONT BRAKE LEVER