Left Handle Switch - HYOSUNG Comet650 Owner's Manual

LEFT HANDLE SWITCH

�
�
�
① ①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
" " PASS " " SWITCH
② ②
Press the " PASS " switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the " ON " posi-
tion, push the " PASS " switch to operate
the head lamp high beam.
CAUTION
Do not operate when the dimmer switch
" " " " position.
③ ③
DIMMER SWITCH
Change the direction of head lamp light.
◉ " ": The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
◉ " ": The head lamp low beam
come on.
�
�
WARNING
Set the dimmer switch " "
vehicle is running in front or against.
④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
◉ " � " Position : Flash the left turn sig-
◉ " � " Position : Flash the right turn
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the " " OFF " " position after com-
pleting the turn or lane change.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
35
" " when other
nal lamp.
signal lamp.
CAUTION