Riding Tips; Starting The Engine - HYOSUNG Comet 250 R User Manual

CAUTION
In case of the engine oil pouring
excessively, the engine output being
made insufficient.
Be careful not to pour engine oil.
9. Operate the engine a few minutes by
idling speed.
Inspect to leak oil at the oil filter cap.
10. Confirm the oil level with the oil level
lens after waiting about a minute next to
stopping the engine.
The oil level is located between the
"Lower line (L)" and the "Upper line (F)".
When below the "Lower line (L)", refill
the oil between the "Lower line (L)" and
the "Upper line (F)".

RIDING TIPS

STARTING THE ENGINE

Before attempting to
start the engine make
sure :
1. The transmission is in neutral.
2. The ignition switch is in the "ON"
position.
3. The engine stop switch is in the "
position.
4. Moving the side stand to the fully upper
position.
5. Inspect every day once before riding
the motor cycle.
WARNING
The
is equipped with the side stand ignition
interlock system.
1. If the transmission is in neutral, you
can start the engine regardless of
clutch lever and side stand.
2. If the transmission is not in neutral,
you can only start the engine with
pulling in clutch lever and side stand
up.
Make sure that the side stand igintion
interlock system is working properly
before riding.
always come on the position lamp,
meter lamp, tail lamp and license plate
lamp when starting the engine.
41
&
CAUTION
&
"