Advertisement
Installation
Remove all packing materials from the
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Panel Functions
Pattern
Number
PATTERN Number:
MAIN Color:
BACK Color:
BLACKOUT / MENU: Different functions are available: long press = Blackout, short press = MENU.
Sound-Activated Mode
Data number for each color:
PATTERN NUMBER
0 Automatic Light show
1 Bargraph
2 Peak Dot
3 Bargraph withTop Color
4 Peak Dot with Top Color
5 Bargraph Center-Out
6 Peak Dot Center-Out
7 Mobile
Example:023 on Display
This means the automatic lightshow is on (0), with Main Color Red (2) and Back Color Blue (3).
LED Bar
Main
Back
Color
Color
Modes can be selected and displayed on the segment.
Main colors can be selected and displayed on the segment.
Background colors can be selected and displayed on the segment.
MAIN COLOR
1 White
2 Red
3 Blue
4 Green
5 Yellow
6 Cyan
7 Orange
8 Magenta
9 UV Blue
DMX. Check that all foam and plastic padding is removed.
POWER
DMX
MASTER
SLAVE
Blackout
(press for Menu)
BACK COLOR
0 Black (Off)
1 White
2 Red
3 Blue
4 Green
5 Yellow
6 Cyan
7 Orange
8 Magenta
9 UV Blue
5
Advertisement
