Advertisement
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
•
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
•
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
•
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. The device must be installed out of the reach of children. Never leave the unit
•
running unattended.
For replacement use fuses of same type and rating only.
•
Repairs, servicing and electric connection must be carried out by a qualified technician.
•
WARRANTY: Till one year after date of purchase.
•
OPERATING DETERMINATIONS
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the LED Bar DMX is lowered from the ceiling or high joists, professional trussing systems have to
•
be used.
Use a clamp to mount the LED Bar DMX, with the mounting-bracket, to the trussing system.
•
The LED Bar DMX must never be fixed swinging freely in the room.
•
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
•
safety-cable.
When rigging, derigging or servicing the LED Bar DMX, always make sure, that the area below the
•
installation place is blocked and staying in the area is forbidden.
The LED Bar DMX can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Improper installation can cause serious damage to people and property !
3
Advertisement
