Worksheet 1 - System Pcb (Slot) Requirements; Digital Ports Required; Electronic Ports Required - Toshiba DK14 Installation And Maintenance Manual

Worksheet 1 – System PCB (Slot) Requirements
Customer
Location

Digital Ports Required

Digital Telephones (DKTs)
2010-H
2010-SD
2020-S
2020-SD
2004-CT
2001-SLT
WRLS-HS
1020-H
1020-SD
Total Digital Telephones (DKTs)
Total DDSS Consoles
Total PDIU-DS
Total Digital door Phone/
Lock Units (DDCB)
Notes
Digital telephones equipped with RPCI-DI, PDIU-D12 or ADM only require one digital port. (See
G
One door phone control box (DDCB) supports three door phones (MDFBs). (See
G
WRLS-HS is the same part number for Digital or Analog (depends on the type installed).
G

Electronic Ports Required

Electronic Telephones (EKTs)
6510-S
6510-H
6520-S
6520-SD
Total Electronic Telephones (EKTs)
Total HDSS Consoles
Total Electronic Door Phone/Lock Unit
(HDCB)
Total BGM Source Extend Amplifiers
Total Alternate BGM Source
Strata DK I&M 5/00
Worksheet 1 – System PCB (Slot) Requirements
1 port per Digital Telephone (1 X Total)
1 port per Digital DDSS Console (1 X Total)
1 port per Digital PDIU-DS (1 X Total)
1 port per Digital DDCB (1 X Total)
Total Digital Ports
1 port per Electronic Telephone (1 X Total)
2 ports per HDSS Console (2 X Total)
1 port per HDCB (1 X Total)
2 ports per amplifier (2 X Total)
1 port per Alternate BGM Source (1 X Total)
Total Electronic Ports
DK424 Configuration
Table 4-10.)
Table 4-20.)
4-21