Toshiba DK14 Installation And Maintenance Manual page 147

Number
Option
Required
PC Attendant
Consoles
(with RATI and
RATHC)
DKi Admin/
Backup
SMIS for ACD
Other Customer-
supplied Items
Telephone
Number
Subassembly
Required
Option
EOCU
DVSU
HVSU2
HVSU/HVSI
HHEU
PDIU-DI2
PDIU-DI
RPCI-D1
DADM
Strata DK I&M 5/00
These features require customer-supplied personal computers. See feature user
guides for individual personal computer requirements.
One EOCU must be installed on each PEKU and/or PESU that is connected to
electronic telephones which are equipped to receive OCA.
Place the PEKU or PESU where it will provide the most efficient use of the 8-
circuit EOCU: The PESU only provides 4 electronic telephone ports; HDSS
consoles use s ports on a PEKU; HDCBs use 1 port on a PESU or PEKU.
One DVSU is required for each digital telephone (2000, 1000-series) that should
receive telephone speaker OCA. Not required for Handset/Headset Speaker
OCA.
6500-series Electronic Telephones equipped with one HVSU2 to receive Speaker
OCA calls.
Electronic Telephones equipped with the older HVSU and HVSI subassemblies
(one per telephone) to receive OCA calls.
One HHEU PCB must be installed in each digital (2000, 1000 series) and
electronic telephone (6500, 6005 series) that supports a headset or connects to
an HESB providing a loud ringing bell.
One PDIU-DI2 or PDIU-DI data calling interface can be installed on a 2000-series
Digital Telephones.
2000-series Digital Telephones must be equipped with an RPCI-DI to transmit and
receive voice and data calls and/or interface with a TAPI PC application interface.
One RPCI-DI per telephone.
One or two Add-on Modules can be attached to 2000-series Digital Telephones to
provide an additional 20 or 40 buttons. Any combination of CO
6'
(Speed Dial) buttons can be added to DADMs.
Worksheet 4 – Option Configuration Guide
Comments
Comments
/LQH
DK424 Configuration
'66
, , and
4-33