Toshiba DK14 Installation And Maintenance Manual page 282

DK424i Installation
Step 4: Install AC Power Components
Table 7-4 Power Cabinet Hardware (continued)
Option
BPSB240
BACL240A
7-20
Cabinet power strip for 208VAC or 240VAC primary power. Provides three 240VAC/20A outlets
(NEMA 6-20R) and nine ft. AC power cord with a standard 240VAC/20A plug (NEMA 6-20P).
This unit is field installed inside system cabinet side panels.
One BPSB240 is required for two or three cabinet systems.
Two BPSB240s are required for four or more cabinet systems.
Notes
o
Local electric codes allow only one AC power cord to be connected to the system when
using 208VAC or 240VAC as the primary AC power.
o
If using 208VAC as primary power, the plug on the BPSB240 AC power cord
(NEMA 6-20P) may have to be changed by a certified electrician depending on local
electric codes.
AC208V or AC240VAC nine ft. power supply cord. This cord must be used when the system is
powered by 208VAC or 240VAC. One cord is required for each cabinet power supply and must
be ordered separately only if using 208VAC or 240VAC as the system primary AC power.
Note The cord is equipped with a AC250Volt/20A plug (NEMA 6-20P) which is standard for
240VAC. If using 208VAC as the system primary power this cord may not exit the
cabinet, a BPSB240 power strip is required and the power strip plug may have to be
changed by a certified electrician depending on local electric codes.
Description
Strata DK I&M 5/00