Introduction Organization - Toshiba DK14 Installation And Maintenance Manual

Introduction
Organization
Chapter 7 – DK424i Installation covers site requirements and cabinet installation. Defines
o
the site requirements necessary to ensure a proper operating environment for the Strata
DK424i. Also included are input power requirements, cable lengths/network requirements,
and grounding requirements. Explains how to install the Base and the Expansion Cabinets.
Instructions are also provided on how to remove and replace cabinets on installed systems.
o Chapter 8 – DK424 T1 provides information on T1/DS-1 interfacing for the DK40i, DK424
and DK424i.
o Chapter 9 – DK Universal Slot PCBs provides procedures for Strata DK40i/DK424i system
Printed Circuit Boards (PCBs) for installation into universal slots. It includes installation
instructions, optional configuration information, and wiring and programming considerations
for each PCB.
Note
Chapter 10 – DK Universal Slot PCB Wiring contains point-to-point wiring diagrams for
o
connection of telephones, lines, peripheral equipment, and power supplies to the Strata DK
systems.
Note
o Chapter 11 – Station Apparatus provides instructions on how to connect telephones to the
Strata DK systems and how to configure and upgrade them for optional features. Procedures
for installing direct station selection consoles, PC and conventional attendant consoles, and
door phones also appear.
o Chapter 12 – Peripheral Installation provides connection procedures for optional peripheral
equipment to Strata DK systems. The instructions for each option include hardware
requirements, PCB configuration, interconnection/wiring requirements, and programming
considerations.
Chapter 13 – DK424 ACD Installation includes installation instructions for Automatic Call
o
Distribution (ACD) and Management Information System (MIS) for the Strata DK40i, DK424
(applies to all common control processors except the RCTUA) and DK424i. Includes
installation instructions for Call Center Viewer..
Chapter 14 – Fault Finding for troubleshooting and fixing problems.
o
o Chapter 15 – Computer Telephony Integration (CTI) contains CTI, TAPI, and System
Open Architecture Interface information. CTI application notes can be inserted here.
Chapter 16 – ISDN contains an overview of the ISDN hardware with specific information on
o
the ISDN Primary Rate Interface (PRI) and Basic Rate Interfaces (BRI). It includes
instructions for installation, hardware requirements, wiring requirements, and some
programming considerations.
o Glossary/Index
xvi
PCBs that cannot be installed into universal slots can be found in the installation chapter
for the system (e.g., Chapter 3 – DK40i Installation).
Wiring diagrams for PCBs that cannot be installed into universal slots can be found in the
installation chapter for the system (e.g., Chapter 3 – DK40i Installation).
Strata DK I&M 5/00