Table of Contents
Advertisement
Installing your vacuum-packer
o It is recommended that you don't position the appliance in closed
rooms at high temperatures with little air circulation, in direct
sunlight or with other atmospheric agents or near heat sources.
o When choosing the position for the appliance, ensure that there
is enough space to completely extract the drawer to its full
potential which is around 510 mm.
o You should also consider the working space needed when the
drawer is open, bearing in mind that the user is in front of the
appliance.
WARNING:
The
support
base)
anchored to the walls using screws or
plugs of the right size.
o The
vacuum
positioned inside the unit.
o The appliance is supplied with special
brackets to fix the container to the
inside of the compartment.
o It should be fixed first to the two
sides of the compartment using eight
4.5 x 16 wood screws for each side.
o Then
the
inserted as far as it will go and
blocked using four self-tapping 4.2 x
13 screws.
unit
(column
must
be
solidly
packer
should
container
should
or
be
be
30
Advertisement
Table of Contents
