Unpacking The Vacuum-Packer - Baumatic BVP460SS User Manual

Unpacking the vacuum-packer

Handling of the appliance should always be carried out by two
people, using the stainless steel handles inserted in the
packaging. Use sticky tape to hold them securely.
They can be hooked onto the two sides of the external container and
should be inserted into the two upper holes as shown in the diagrams
below:
The handles should be inserted completely so that the two ends
come out of the two lower holes. Otherwise, there is a risk of
scratching the plastic basin inside the container.
Open the cardboard packaging and extract the two blocking brackets
for the appliance and the bag containing:
o 4 x Self-tapping 4.2 x 13 screws for fixing the front of the
appliance to the blocking brackets.
o 16 x wood 4.5 x 16 screws for fixing the blocking brackets to the
unit panels.
o 1 x Plexiglas template for correctly marking the unit bracket
holes.
26