Switching The Appliance On; Preserving Cycles For Bags Preparation; Preserving Cycle For Bags - Baumatic BVP460SS User Manual

Vacuum-packer
Table of Contents

Advertisement

S
witching the appliance on
o Turn the appliance on using the ON / OFF switch located on the
right of the main body of the machine.
o A short beep is emitted whic
start-up" mode. This mode is also signalled by all four of the LED
displays switching on simultaneously on the control panel.
R
EMEMBER: Before touching the buttons, a self-calibration
period of around two seconds must be completed.
P
reserving cycles for bags
Preparation
o Open the appliance drawer as far as it will go as signalled by a
stoppage "click".
o Turn the vacuum-packer on using the ON / OFF switch on the
side.
o Choose a bag depending on the usage (preservation or cooking),
which is adapted to the size of the product. The product should
not occupy more than 2/3 of the volume of the bag.
o Open the lid of the appliance and ensure that the vacuum
chamber is empty and the product to be packed is dry. When
inserting the food into the bag, be careful not to dirty or dampen
h indicate
s the appliance is in "initial
the internal part near to the opening in
order to not affect the efficiency of the
seal.
o Position the bag support grill depending
on the size of the product. For small
bags rest on the supports. For larger
bags rest on the horizontal side.
12

Advertisement

Table of Contents
loading

Table of Contents