Matriculation Plate Data; Electrical Connection - Baumatic BVP460SS User Manual

Vacuum-packer
Table of Contents

Advertisement

Matriculation plate data

The matriculation plate data are positioned on:
o 1 label on the external cardboard packaging.
o 2 device plates, positioned at the centre top of the container and
below the drawer.
WARNING: Do not remove, damage or adjust the matriculation
plate attached to the device.

Electrical connection

We recommend that the appliance is connected by a
qualified electrician, who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E. and local regulations.
o Your vacuum-packer comes supplied with a standard 16A Schuko
plug and a power cable which is 150 cm long. The plug should
have a 10A fuse and be easily accessible.
WARNING: If the full length of the cable is not used DO NOT
wind it back on itself. Leave it unwound and ensure that it is
not a tripping hazard.
o The wiring in the mains lead is coloured as follows:
Brown
Blue
Green and yellow
o As the colours of the wires in the appliance's mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
The brown wire must be connected to the terminal marked "L"
(live), or coloured red.
Live
Neutral
Earth
28

Advertisement

Table of Contents
loading

Table of Contents