5. SYSTEM MAINTENANCE REFERENCE
5.1 SERVICE PROGRAM MODE
5.1.1 SP TABLES
See "Appendices" for the following information:
Printer Controller Service Mode Tables
Engine Mode Tables
Before accessing the service menu, do the following:
Confirm that there is no print data in the printer buffer (the Data In LED must not be
lit or blinking).
If there is some data in the buffer, wait until all data has been printed.
5.1.2 INPUTTING A VALUE OR SETTING FOR A SERVICE
PROGRAM
Enter the required program mode as explained above. The setting appearing on the display
is the current setting.
Select the required setting using the "Up/Down arrow" keys [A], then press the "OK" key [B].
The previous value remains if the "OK" key [B] is not pressed.
M047
CÓPIA NÃO CONTROLADA
5-1
CÓPIA NÃO CONTROLADA
Service Program Mode
SM