Ricoh M047 Service Manual page 173

Side to Side Reg
Adjusts the printing side-to-side registration from the 1st paper feed station
1002
using the trimming area pattern (SP2-902 No.12).
Push [ ] or [ ] to select the settings (plus or minus).
Specification: 0 ±2.0 mm.
1002 1 BypassTray
1002 2 MainTray1
1002 3 MainTray2
1002 4 BankTray1
1002 5 BankTray2
1002 6 Duplex
Regist sag
Adjusts the relay clutch timing at registration. Relay clutch timing
1003
determines the amount of paper buckle at registration. (A "+" setting causes
more buckling.)
1003 1 BypassTray Plain
1003 2 BypassTray Thick
1003 3 BypassTray Thick2
1003 4 MainTray Plain
1003 5 MainTray Thick
1003 6 MainTray Thick2
1003 7 BankTray Plain
1003 8 BankTray Thick
1003 9 BankTray Thick2
SM Appendix
CÓPIA NÃO CONTROLADA
[-40 to +40 / 0 / 1 mm]
[–8 to 8 / 0 / 1 mm step]
3-11
CÓPIA NÃO CONTROLADA
SP Tables
M047