Ricoh M047 Service Manual page 226

SP Tables
5857 Debug Log Save
On/Off (1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until
001
this feature is switched on.
[0 to 1 / 0 / 1]
0: OFF, 1: ON
Target (2: HDD 3: SD)
Selects the destination where the debugging information generated by the
002
event selected by SP5858 will be stored if an error is generated
[2 to 3 / 2 / 1]
2: HDD, 3: SD Card
Save to HDD
005
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
006
Specifies the decimal key number of the log to be written to the SD Card.
HDD to SD Card Latest
Takes the most recent 4 MB of the log written to the hard disk and copies
them to the SD Card.
009
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card.
HDD to SD Any
Takes the log of the specified key from the log on the hard disk and copies it
to the SD Card.
010
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card. This SP does not execute if there is
no log on the HDD with no key specified.
M047
CÓPIA NÃO CONTROLADA
3-64
CÓPIA NÃO CONTROLADA
SM Appendix