2. INSTALLATION
2.1 INSTALLATION REQUIREMENTS
2.1.1 ENVIRONMENT
This machine, which uses high voltage power sources, can generate ozone gas.
High ozone density is harmful to human health. Therefore, the machine must be
installed in a well-ventilated room.
1.
Temperature Range: 10°C to 32°C (50°F to 89.6°F)
2.
Humidity Range: 15 % to 89 % RH
3.
Ambient Illumination: Less than 2,000 lux (do not expose to direct sunlight).
4.
Ventilation: 3 times/hr/person
5.
Avoid areas that are exposed to sudden temperature changes. This includes:
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
6.
Do not install this machine in an area where it will be exposed to corrosive gases.
7.
Do not install the machine at locations over 2,000 m (6,562 ft.) above sea level.
8.
Put the machine on a strong and level base. Inclination on any side should not exceed
5 mm.
9.
Do not put the machine where it may be subjected to strong vibrations.
2.1.2 MACHINE LEVEL
Front to back: Within 5 mm. (0.2 inches) of level.
Right to left: Within 5 mm. (0.2 inches) of level.
M047
CÓPIA NÃO CONTROLADA
2-1
CÓPIA NÃO CONTROLADA
Installation Requirements
SM