If enabled, the image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit 7
Letterhead mode printing
Routes all pages through the duplex unit.
If this is disabled, simplex pages or the last page of an odd-paged duplex
job, are not routed through the duplex unit. This could result in problems
with letterhead/pre-printed pages.
Only affects pages specified as Letterhead paper.
1001
Bit Switch
006 Bit Switch 6
bit 0
DFU
to 5
PDL Auto Detection timeout of jobs
submitted via USB or Parallel Port
(IEEE 1284).
bit 6
To be used if PDL auto-detection fails. A failure of PDL autodetection
doesn't necessarily mean that the job can't be printed. This bit switch tells
the device whether to time-out immediately (default) upon failure or to wait
10 seconds.
bit 7
DFU
SM Appendix
CÓPIA NÃO CONTROLADA
3-5
CÓPIA NÃO CONTROLADA
SP Tables
1: Enable
0: Disable
(Duplex)
0
1
-
-
1: Enable
0: Disable
(10
(Immediately)
seconds)
-
-
M047