SP Tables
Bit Switch Programming
Currently, the bit switches are not being used.
1.
Enter the SP mode, select "Service Menu", then press [Enter] twice.
2.
Select #1, #2, #3, or #4 for the desired bit switch, then press [Enter].
[ ] [ ]: Move to the next switch.
3.
Adjust the bit switch using the following keys.
[ ] [ ]: Move to the next bit.
[Escape]: Exit without saving changes.
[Enter]: Exit and save changes.
The left digit on the display is bit 7 and the right digit is bit 0.
4.
Press [Enter] to save changes and exit.
M047
CÓPIA NÃO CONTROLADA
3-8
CÓPIA NÃO CONTROLADA
SM Appendix