Ricoh M047 Service Manual page 199

Machine No. Setting DFU
Used to input the machine serial number. This is normally done at the
5811
factory.
If you want to know the serial number, print the system parameter list. Press
and then input "A".
Service TEL
Use these SP modes to input service and support telephone numbers.
5812
Enter the number and press k Key.
Press the
the telephone number.
5812 1 Telephone
5812 2 Facsimile
5816 NRS Function
I/F Setting
Selects the remote service setting.
5816 001
[0 or 2 / 2 / 1 /step]
0: OFF (Remote service off)
2: Network (@Remote remote service on)
CE Call
Performs the CE Call at the start or end of the service.
[0 or 1 / 0 / 1 /step]
5816 002
0: Start of the service
1: End of the service
NOTE: This SP is activated only when SP 5816-001 is set to "2".
SM Appendix
CÓPIA NÃO CONTROLADA
key to input a pause. Press the "Clear modes" key to delete
Use this to input the telephone number of the
CE printed on the SP print mode printout.
Use this to input the fax number of the CE
printed on the SP print mode printout.
3-37
CÓPIA NÃO CONTROLADA
SP Tables
M047