Ricoh M047 Service Manual page 181

Toner End Sensor
3924
Toner Near-end
3924 1
Threshold adjustment for toner near-end detection.
Toner End
3924 2
Threshold adjustment for toner end detection
Toner End Judge
This SP code determines whether the machine disables printing when the
machine detects toner end.
Even when toner end is detected, there is a small amount of toner left in
the AIO. If a user wants to print with the AIO until all toner is used up,
3927
then set this SP to 1. But then, there is no toner end detection, and the
user must watch the print quality and change the AIO when prints
become too pale.
[0 or 1 / 0 / -]
0: Yes (Printing stops when toner end is detected.)
1: No (Printing can continue even after toner end is detected.)
SM Appendix
CÓPIA NÃO CONTROLADA
[100 to 1000 / 200 / 100 ms step] DFU
[250 to 1050 / 550 / 50 ms step] DFU
3-19
CÓPIA NÃO CONTROLADA
SP Tables
M047