Please Read This First - Mighty Mule Silver-HD Dual 25th annivesary series Installation Manual

PLEASE READ THIS FIRST!

Thank you for purchasing a GTO/ACCESS SYSTEMS gate opener. When correctly installed and properly used,
your gate operator will give you many years of reliable service. Please read the following information to ensure
you have the correct system for your particular needs. This manual will enable you to properly install your
Automatic Gate Operator.
The gate operator is designed for installation on a pull-to-open single leaf gate. By purchasing two accessory
brackets [347IH], the gate operators can accommodate push-to-open gates (gates that open out from the
property). The gates must not exceed 18 feet in length nor weigh more than 850 pounds per leaf (please see
Technical Specifications on page 10). The gate operator can be used on vinyl, aluminum, chain link, farm tube,
and wrought iron gates. Use on solid (wood) gates is not recommended. Solid surface gates have a high resistance
to the wind. If the wind is strong enough, the operator will obstruct, stop, and blow fuses.
The gate operator accommodates extra transmitters, digital keypads, solar panels, push buttons, automatic gate
locks, and other access control products. These optional accessories are shown in the back of this manual.
The gate operator features adjustable stall force. This safety feature makes the gate stop and reverse direction
within two seconds when it comes in contact with an obstruction. The "MIN" setting means the gate will exert
the minimum force on an obstruction before it stops and reverses direction.
The gate operator also has an adjustable auto-close feature. It can be set to remain open from 3 to 120 seconds
before automatically closing. Pressing the transmitter button at any time after the gate fully opens will cause it to
close immediately. "OFF" is the factory setting; meaning the gate will stay open until you press the transmitter
button (or keypad, etc.) again.
Please call GTO at (800) 543-GATE [4283] or (850) 575-0176 for more information about our GTO/ACCESS
SYSTEMS professional line of gate operators and accessories.
BEFORE YOU BEGIN TO INSTALL YOUR AUTOMATIC GATE OPERATOR:
Read these instructions carefully and completely to become familiar with all parts and
installation steps. You must read the installation manual for detailed instructions on gate
operator safety and proper use of the gate operator.
24/7 Troubleshooting Wizard: http://support.gtoinc.com
iii