Please Read This First - Mighty Mule 200 E-Z GATE OPENER UL325 SERIES Installation Manual

PLEASE READ THIS FIRST!

Thank you for purchasing a Mighty Mule® 200 E-Z Gate Opener—GTO's "do-it-yourself" automatic gate
opener! When correctly installed and properly used, your Mighty Mule® E-Z Gate Opener will give you
many years of reliable service. Please read the following information and watch the enclosed video to
ensure you have the correct system for your particular needs. Furthermore, this manual and the video will
enable you to properly install your Mighty Mule® E-Z Gate Opener.
The Mighty Mule® 200 E-Z Gate Opener is designed for installation on a pull-to-open single leaf gate
(gates that open into the property). The gate must not exceed 12 feet and 300 pounds (please see Technical
Specifications on page 10). The Mighty Mule® E-Z Gate Opener can be used on vinyl, aluminum, chain
link, farm tube, and wrought iron gates. Use on solid gates is not recommended. Solid surface gates have
a high resistance to the wind.
Use on solid (surface) gates is not recommended. Solid surface gates have a high
resistance to the wind. If the wind is strong enough, the opener will obstruct and
stop, blow fuses, or may damage the equipment.
The Mighty Mule® E-Z Gate Opener accommodates extra transmitters, digital keypads, solar panels,
push buttons, automatic gate locks, and other access control products. These optional accessories (see
the enclosed Mighty Mule® Accessory Catalog) are available at most stores. Your store should be able to
special order any accessory not in stock. If your store cannot special order accessories, please call the
GTO Sales Department (800-543-GATE).
The Mighty Mule® E-Z Gate Opener features adjustable obstruction sensing. This safety feature
makes the gate stop and reverse direction within 2 seconds when it comes in contact with an obstruction.
MIN is the factory setting; meaning the gate will exert the minimum force on an obstruction before it stops
and reverses direction.
The Mighty Mule® E-Z Gate Opener also has an adjustable auto-close feature. After the gate reaches
the fully open position, it can be set to remain open up to 120 seconds before automatically closing.
Pressing the transmitter button at any time after the gate opens fully will cause it to close immediately.
OFF is the factory setting; meaning the gate will stay open until you press the transmitter (or keypad, etc.)
again.
PLEASE NOTE—If your application requires any of the following:
Push-to-open;
Column Mounting;
Slide gates;
Heavy duty or commercial uses;
Professional installation;
please call GTO at (800) 543-GATE [4283] or (850) 575-0176 for information about our GTO/PRO
professional line of gate openers and accessories. Our Sales Department will be glad to give you the name
and phone number of a GTO/PRO dealer near you.
BEFORE YOU BEGIN TO INSTALL YOUR AUTOMATIC GATE OPENER:
watch the enclosed video and read these instructions carefully and completely
to become familiar with all parts and installation steps. The video is only designed
as an overview of the installation procedure. You must read the installation manual
for detailed instructions on gate opener safety and proper use of the gate opener.
E-Z GATE OPENERS
iii
®