Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Required Safety Precautions for Gates
Install Warning Signs
Warning signs alert people of automatic gate operation and are required when installing the GTO® gate opener.
Furthermore, a walk-through gate must be installed if pedestrian traffic is expected near the vehicular gate. We recommend
using the GTO Bulldog Pedestrian Gate Lock (Call the GTO Sales Department at 1-800-543-4283) for controlled access.
Bulldog Pedestrian
Gate Lock
(recommended, not included
Pedestrian Gate
Photo Beam
Photo Beam
Entrapment Protection
GTO's inherent obstruction settings, even when properly adjusted, may not be sensitive enough to prevent bodily injury in
some circumstances. For this reason, safety devices such as safety edge sensors (or photoelectric sensors), which stop and
reverse gate direction upon sensing an obstruction, are suggested for enhanced protection against entrapment.
Warning Signs
The warning signs (at right) must
be installed on both sides of the
gates (see page 7 for details).
)
Warning Sign
Vehicular Gate
Contact Sensor
recommended, not included
(
)
Contact Sensor
Warning Sign
recommended, not included
(
)
Vehicular Gate
Contact Sensor
recommended, not included
(
)
!
WARNING
Moving Gate Can Cause
Injury Or Death
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
6
Photo Beam
Photo Beam
Contact Sensor
recommended, not included
(
)
Hide quick links:
Advertisement
Table of Contents
