Important Safety Instructions; Disconnecting The Opener - Mighty Mule Silver-HD Dual 25th annivesary series Installation Manual

IMPORTANT SAFETY INSTRUCTIONS

Because automatic gate openers produce high levels of force, consumers need to know the potential hazards associated with
improperly designed, installed, and maintained automated gate opener systems. Keep in mind that the gate opener is just
one component of the total gate operating system. Each component must work in unison to provide the consumer with
convenience, security, and safety.
This manual contains various safety precautions and warnings for the consumer. Because there are many possible
applications of the gate opener, the safety precautions and warnings contained in this manual cannot be completely exhaustive
in nature. They do, however, provide an overview of the safe design, installation, and use of this product. CAREFULLY
READ AND FOLLOW ALL SAFETY PRECAUTIONS, WARNINGS, AND INSTALLATION INSTRUCTIONS TO
ENSURE THE SAFE SYSTEM DESIGN, INSTALLATION, AND USE OF THIS PRODUCT.
Precautions and warnings in this manual are identified with this
that can result in damage to the opener or its components, serious injury, or death.
Because GTO automatic gate openers are only part of the total gate operating system, it is the responsibility of the
consumer to ensure that the total system is safe for its intended use.
To Manually Open and Close the
Gate, Follow the Procedure Below:
CAUTION: The gate will move freely and uncontrolled when the gate opener is
removed from the gate. ONLY disconnect the opener when the control box power
switch is OFF and the gate is NOT moving.

Disconnecting the Opener

Turn control box power switch OFF.
1.
2. Remove hairpin clip, clevis pin, and bushing
from either the front or rear mounting point.
3. Remove the opener from the mount.
The gate can be opened and closed manually
when the opener is disconnected.
NOTE: Substitute a included Pin Lock for the clevis pin on the
front mount of each gate opener to prevent unauthorized removal
of the opener from the gate.
warning symbol. The symbol identifies conditions
Front Mount
Bushing
Hairpin Clip
1
Clevis Pin
Gate Bracket