Table of Contents
Advertisement
Installing the Post Bracket Assembly and Gate Bracket
Step 7
Mark reference points for bolt holes on the fence post through middle of bracket slots. Mark reference points for bolt holes
on the gate cross member through middle of gate bracket slots. After marking your reference points, remove the opener and
brackets from the fence and gate.
Step 8
3
Drill
/
" holes into fence post
8
as marked.
Step 9
Fasten post bracket assembly to
the fence post using
3
(4)
/
" x 8" bolts, washers,
8
lock washers, and nuts
(provided).
NOTE: In cases where the
fence post has a diameter larger
than 6", threaded rods or
carriage bolts longer than 8"
(not supplied) must be used.
Step 10
Drill
3
/
" holes into the gate
8
cross member as marked.
Mount gate bracket using (2)
3
/
" x 2-3/4" bolts, washers, lock
8
washers, and nuts (provided).
NOTE: After the gate opener installation
is complete and operation of the opener
system has been tested, you should
remove excess bolt length extending
beyond the tightened nuts with a
hacksaw or bolt cutters.
FRONT VIEW
Mark fence post through
middle of bracket slots
and drill 3/8" holes
Post Bracket
Assembly
Gate Bracket Mounting Examples
SIDE VIEW
Round Tube & Chain Link Gate
Square Tube Gate
SIDE VIEW
Remove excess bolt length
with hacksaw or bolt cutters
Gate In Open Position
Mark cross member through middle of
gate bracket slots and drill 3/8" holes
FRONT VIEW
Mounting Plate
Created for
Decorative Gate
(required but not
supplied)
15
EXAMPLES
TOP VIEW
Round Metal Post
Square Metal Post
Square Wood Post
Round Wood Post
SIDE VIEW
Remove excess bolt length
with hacksaw or bolt cutters
Hide quick links:
Advertisement
Table of Contents
