Toshiba GA-1040 Operator's Manual page 72

8
Click on [OK].
9
Select the printer driver that compatible to
your GA-1040 printer and click on [Next].
• When the GA-1040 printer is an US version, which
the default paper size type is LT system, select
"TOSHIBA e-STUDIO45srs-PCL6UC" (when you
install the PCL6 printer driver) or "TOSHIBA e-
STUDIO45srs-PS3UC"
PostScript printer driver).
• When the GA-1040 printer is an European version,
which the default paper size type is A4 system, select
"TOSHIBA e-STUDIO45srs-PCL6EU" (when you
install the PCL6 printer driver) or "TOSHIBA e-
STUDIO45srs-PS3EU"
PostScript printer driver).
: The PostScript option, PS3 Upgrade (GE-1020) or PS3 & HDD Upgrade (GE-1030), is
required to use the PostScript Driver.
10
Change the name if desired, select whether
using this printer as a default printer, and click
on [Next].
70
(when you install the
(when you install the