Toshiba GA-1040 Operator's Manual page 27

10
Press [SUBNET MASK] and enter the Subnet
Mask if required.
• To move the cursor, press [
• You cannot enter any number exceeding 255.
• "0.0.0.0" and "255.255.255.255" cannot be assigned
to the Subnet Mask.
11
Press [SET] to save the settings.
• The display returns to the screen at Step 7.
• When the Gateway address is required to be set, go
to next step.
• When the Gateway address is not required to be set,
skip to Step 15.
12
Press [GATEWAY].
13
Press [DISABLE] for "Enable Auto IP" and
enter the gateway address using numeric keys.
• To move the cursor, press [
14
Press [SET] to save the settings.
] or [ ].
] or [ ].
25