Toshiba GA-1040 Operator's Manual page 57
Digital plain paper copier network printer board printer function
Hide thumbs
Also See for GA-1040:
- Operator's manual (122 pages) ,
- Operator's manual (102 pages) ,
- Operator's manual (100 pages)
Table of Contents
Advertisement
Comment
Enter the information about the GA-1040 printer. The comments are listed in the Comment
column of the GA-1040 printer displayed in the Network Neighborhood of Windows Explorer.
Domain or Workgroup
Enter the Domain or Workgroup that the GA-1040 printer appears. The Domain or
Workgroup is set to "WORKGROUP" as a factory default.
Use WINS Server
Check this when you want to use WINS, Windows Internet Name Service, to name the GA-
1040 printer. When you check this, set "Enable Auto IP" or "IP Address" to specify the IP
address of the WINS server.
Enable Auto IP
Check this when you want to obtain the IP address of the WINS server automatically.
IP Address
Enter the IP address of the WINS server.
4
"Reset the Printer to Enable Setting" message
is displayed on the page after clicking on
[SETUP].
5
Click on the [Other] menu and click on the
[Reset] tab.
• The Printer Reset page is displayed.
6
Click on [Printer Reset].
• The confirmation screen appears.
55
Advertisement
Table of Contents
