Toshiba GA-1040 Operator's Manual page 76

5
Enter "\\[Server Name]\[Queue Name]" in the
"Enter a port name" field, and click on [OK].
• The [Server Name] of the port name must be the
server name that you entered for the Server Name of
the Windows Printing Service setting on TopAccess.
The default server name of the GA-1040 printer is "e-
STUDIO45".
• The [Queue Name] of the port name must be a queue
name, direct, hold, or print, on the GA-1040 printer.
Enter a queue depending on how you operate the
printing.
direct - print jobs are sent straight to the printer
without spooling.
hold - print jobs are held until users operate copying
or moving them to the Print queue with the job
management tools.
print - print jobs are spooled to the hard disk in the
GA-1040 printer and print out. Use this queue for a
general printing.
: The Hold queue and Print queue are only available when the HDD option, PS3 & HDD
Upgrade (GE-1030), is installed.
6
Click on [Cancel] to close the screen.
74