Setup Flow For Macintosh - Toshiba GA-1040 Operator's Manual

: The PostScript option, PS3 Upgrade (GE-1020) or PS3 & HDD Upgrade (GE-1030), is
required for printing from a Macintosh computer.
Connecting the GA-1040
Connect the GA-1040 to your network with a network cable.
P13 "CONNECTING TO THE NETWORK"
Preparing to use the TopAccess
Set the TCP/IP protocol to use the TopAccess. When the printer is connected to the TCP/IP
network, you can use the TopAccess, a web-based utility, to remotely set up the printer from
your computer.
P16 "SETTING UP THE TCP/IP"
Setting up the Protocol
Set the AppleTalk.
P46 "SETTING UP THE APPLETALK"
Installing the Printer Driver
Install the printer drivers to Macintosh computer.
P115 "Installing the Printer Driver to Macintosh"

Setup Flow for Macintosh

9