Toshiba GA-1040 Operator's Manual page 42

4
Press [SETTING] and press [ADMIN].
• When you already set the administrator password,
the input password screen is displayed after pressing
[ADMIN]. In this case, enter the password and press
[SET] to continue the operation.
5
Press [PROTOCOL SETUP].
6
Press [IPX/SPX].
• When you want to set the printer to automatically find
an appropriate frame type, go to Step 7.
• When you want to specify the frame types to be used,
go to Step 8.
SUPPLEMENT:
It is required to set the IPX/SPX only when
you want to change the frame types to be
used. The printer is configured to select an
appropriate frame type automatically. If you
do not need to change the setting, go to
Step 9.
40