Toshiba GA-1040 Operator's Manual page 21

7
Press [ETHERNET].
8
Press [ENABLE] for "Enable Auto IP" and
select the protocol by pressing either [DHCP],
[RARP] or [BOOTP].
• [ENABLE] is must be selected for "Enable TCP/IP" as
a default. If it is not selected, press [ENABLE] for
"Enable TCP/IP".
9
Press [SET] to save the settings.
• The display returns to the screen at Step 7.
• When the Gateway address is required to be set, go
to next step.
• When the Gateway address is not required to be set,
skip to Step 12.
10
Press [GATEWAY].
19