Chapter 4 First-Time Configuration; Running The Wizard; Figure 67: Console Ports For Sx60Xx/Sx65Xx Managed Systems - Mellanox Technologies SX6518-NR Hardware Installation Manual

InfiniBand Switch Platform Hardware User Manual
4 First-Time Configuration
4.1

Running the Wizard

Connect the host PC to the console (RJ-45) port of the switch system using the sup-
Step 1.
plied cable. The console ports for systems are shown below as examples.

Figure 67: Console Ports for SX60xx/SX65xx Managed Systems

Mellanox Technologies
On SX65xx systems, when having dual management systems, first connect the cable
and configure the master card and only then configure the slave. By default the master
card is the top management module. Initial configuration must be performed on all of
the management modules.
Make sure to connect to the console RJ-45 port of the switch and not to the MGT port.
No remote IP connection is available at this stage.
71