One-Time Auto-Arming Bypass; Low Battery Warning; Automatic Noise Abatement - Clifford Concept 650 Owner's Manual

G919730P_01-07.qxd 1/12/07

one-time auto-arming bypass

This will bypass the auto arm feature once only.
1. With the key, turn the ignition on, then off within two seconds.
2. The siren will chirp once to confirm auto arming bypass.
3. The system will not auto arm.
n n o o t t e e : : The system will revert to normal auto arming when the system
sees the ignition on for at least three seconds.
During auto arming bypass the system will not roll up the windows if
SmartWindows is connected, and the accessory output will not auto-
activate when using the remote to arm the system.

low battery warning

When the transmitter battery is low, the siren will generate a low-
pitched tone when the alarm is disarmed.

automatic noise abatement

Alarm sounding is limited to ten 30-second siren duration cycles to
meet European criteria and local noise pollution laws.
14
3:39 PM Page 14
24-Mar-10