Related Manuals for Clifford Concept 600
Summary of Contents for Clifford Concept 600
- Page 1 The Science of Security™ ONCEPT Complete Owner’s Manual USA Headquarters ❖ Canada Headquarters ❖ UK Headquarters ❖ Germany Headquarters ❖ Mexico Headquarters ❖...
-
Page 2: Standard Features
United Kingdom customers: Please pardon our American English references and spellings. Trunk and hood references indicate the boot and bonnet, respectively; parking lights are indicator lights; gas/gasoline is petrol; a parking lot is a car park; windshield is windscreen. EC-approved (Europe) þ... -
Page 3: Maintenance
Concept 600’s BlackJax feature provides a safe and effective means of recovering your vehicle after a theft or carjacking. In a carjacking situation, the sooner you are out of the car the better. Don’t resist or take anything with you, just get out and get away. The instant the car door is opened, your Concept 600 takes charge. -
Page 4: "Guessing" Your Code Won't Help A Carjacker
But these remote controls are much more secure than car keys because each incorporates our ACG 2 (Anti-CodeGrabbing 2) technology with trillions of digital codes for the ultimate protection against remote control cloning devices. You will use your Concept 600 remote control to arm and disarm the system, lock and unlock the doors, activate/deactivate the panic feature, enter/exit valet mode and command options such as a remote trunk release, power window control, electric garage door interface or even remote starting of the engine and heater or air conditioner, among other options. -
Page 5: Acg 2 (Anti-Codegrabbing 2™)
“smart” code-grabbers can even decipher the code hopping/jumping sequence used by other car alarm manufacturers. In contrast, your Concept 600 uses complex digital signal processing and unbreachable code encryption to randomly change the digital code every time you use the remote control. -
Page 6: Automatic Remote Control Low-Battery Warning
If your remote control battery is low, you’ll hear an unusually low-pitched chirp when you remotely disarm your Concept 600. Replacement batteries are available from any Authorized Clifford Dealer. Replacement of a remote control battery is fairly easy, but any Authorized Clifford Dealer will be happy to do it for you without cost provided that you buy the replacement battery at their shop (it’s also a good idea to keep a spare of each battery in your glove box just in case). -
Page 7: Remote Controlled Valet Mode
All car alarms have a valet mode that turns off the security features. This mode turns off the alarm if the system is not responding to the remote. However, thieves disable other alarms by flicking this easy-to-find “hidden” valet switch. In contrast, your system has safeguards that ensure a thief cannot enable the valet mode as a way of “turning off”... - Page 8 The Dual-Zone OmniSensor uses our most advanced digital signal processing to detect theft-related vibrations/ impacts and triggers the alarm. It also has a secondary warning zone that can detect less serious occurrences — such as someone bumping your car with their car door — and will sound a brief warning tone.
-
Page 9: Timer Options
1 of the master remote or the the system is armed, your Concept 600 will continue to idle the engine for any duration you choose up to 4 minutes. To ensure against any possibility of false alarms, the system will keep the sensors off-line while the engine is idling, then automatically bring them back online right after the engine is shut down. -
Page 10: Night Vision
All of the following NightVision Headlight Automation features are built into your Concept 600: You may turn the NightVision features on or off whenever you wish (see User-selectable features). The system automatically turns on the headlights. The system automatically turns off the headlights. -
Page 11: Multiple-Event Totalrecall
The system automatically bypasses any faulty point and arms all other triggers and sensors for the utmost possible protection. If you accidentally arm with the hood, trunk or a door open, just close it (no need to disarm-and-rearm) and the system will again monitor that point. The system’s memory records the identity of the last eight activated or malfunctioning triggers and sensors, which allows your installer to instantly track down malfunctions. -
Page 12: Reset All Features
Clifford G4 system on your other vehicle(s). For instance, to set button ✱ of the other car ’s companion remote to arm and disarm your Concept 600, select column 4, row 1, then press button ✱ of the other vehicle’s remote (you’ll hear one chirp). - Page 13 other vehicle(s). Just select the function you wish, then press the unused button or button combination on the other remote that you want to use to perform that function on this system (you will then hear the chirps noted). NOTE: You must first set a button or button combination on the other car’s remote that will arm/disarm the system (column 4, row 1) before these others will be accepted.