One-Time Auto-Arming Bypass; Low Battery Warning - Clifford CONCEPT 470 Manual

The operations described in this section refer to transmitter buttons.
Remember, the buttons used in all the instructions in this guide corre-
spond to a Standard Configuration transmitter. This may not be how
your transmitter is set up.
To enter Valet Mode, press
indicator will light solid if you are entering Valet Mode, or will turn off
if you are exiting Valet Mode.

one-time auto-arming bypass

This will bypass the auto arm feature once only.
1. With the key, turn the ignition on, then off within two seconds.
2. The siren will chirp once to confirm auto arming bypass.
3. The system will not auto arm.
n n o o t t e e : : The system will revert to normal auto arming when the system
sees the ignition on for at least three seconds.
During auto arming bypass the system will not roll up the windows if
SmartWindows is connected, and the accessory output will not auto-
activate when using the remote to arm the system.

low battery warning

When the transmitter battery is low, the system will generate a low-
pitched tone when disarmed.
12
twice then . The LED status