Clifford Concept 650 Owner's Manual page 4

REG 10.3
FOR TYPE-APPROVAL OF AN ELECTRIC/ELECTRONIC SUB-ASSEMBLY
WITH RESPECT TO ELECTRONMAGNETIC COMPATIBILITY
1. Make (trade name of manufacturer):Directed Electronics
2. Type: 350HV (426V), 426P Python 460HP 1 way, Matrix +1 p/n 3105X, Matrix 1X p/n
3305X, 350 plus p/n 3105V, Responder 350 p/n 3305V, 3305P Python 460 two way &
3105P Python 460 max 1 way.
3. Means of Identification of type, if marked on the component/separate technical unit:
Sticker on base of unit
3.1. Location of marking: On top of unit
4. Name and address of manufacturer:
Directed Electronics
1 Viper Way, Vista, CA 92081, USA.
Name and address of authorized representative, if any:
Carl Huntington
120 Riverview Rd, Ewell, Epsom, Surrey, KT19 0JQ
5. In case of components and separate technical units, location and method of affixing
of the approval mark: Printed on Sticker on top of unit
6. Address(es) of assembly plant(s):
Nutek
No.167, Lane 235, BauChiau Road, ShinDian City, Taipei County 231, Taiwan
7. This ESA shall be approved as a Component:
8. Any restrictions of use and conditions for fitting: See instructions with product
9. Electrical system rated voltage:
Appendix 1.
Description of the ESA chosen to represent the type (electronic block diagram and list
of main components constituting the ESA (e.g. make and type of microprocessor,
crystal etc.).
Appendix 2.
Relevant test report(s) supplied by the manufacturer from a test laboratory accredited
to ISO 17025 and recognized by the Approval Authority for the purpose of drawing up
the type approval certificate.
ANNEX 2B.
INFORMATION DOCUMENT
V Pos/Neg Ground.12V
24-Mar-10