Clifford Concept 650 Owner's Manual page 157

N919730P_01-07.qxd 1/12/07
installer selectable features descriptions - column two
accessory output a programming
The auxiliary accessory output wire (RED/WHITE) can be programmed for several dif-
ferent types of outputs.
P1 0.8 seconds: The pulsed output is disabled with the ignition on or the alarm
armed.
P2 0.8 seconds: The pulsed output will operate any time.
Timed: The length of output duration set.
Latched: The output can be turned on at any time with the remote control and
will remain in that state until the button is pressed again.
Latched (ignition reset): The output can be turned on at any time with the remote
control and will remain in that state until the button is pressed again.
accessory output b programming
The auxiliary accessory output wire (WHITE/BLUE) can be programmed for several
different types of outputs.
P1 0.8 seconds: The pulsed output is disabled with the ignition on or the alarm
armed.
P2 0.8 seconds: The pulsed output will operate any time.
Timed: The length of output duration set.
Latched: The output can be turned on at any time with the remote control and
will remain in that state until the button is pressed again.
Latched (ignition reset): The output can be turned on at any time with the remote
control and will remain in that state until the button is pressed again.
accessory output a timer duration
Start Timer: Press the
timer duration setting.
Stop Timer: Press the
duration setting, or for maximum time, do not press the
N N O O T T E E : : The timer max setting is 255 seconds.
© 2007 directed electronics
3:41 PM Page 39
button; the siren will chirp to signal the start of the
button; the siren will chirp to signal the end of the timer
button.
39
24-Mar-10