Clifford Concept 650 Owner's Manual page 150

N919730P_01-07.qxd 1/12/07
grid entry. Now program the features by entering the columns and rows as
described previously.) 3 chirps are always heard when entering installer
programming grid and 1 chirp when entering user programming grid.
N N O O T T E E : : Refer to the Feature Descriptions sections of this guide for important notes and
descriptions of the system features and programming.
7. Exit programming - Once you have completed programming you can exit pro-
gramming mode by turning the ignition off or wait 60 seconds without pressing
the PlainView 2 Valet switch. The siren will chirp three times to indicate program-
ming mode has been exited.
user selectable features
* This feature is only available with optional IntelliStart connected.
** This feature is only available with optional SmartWindows connected.
*** 5-button transmitters only. To program 4-button remote controls use New remote learn in column 3.
**** This feature is not evaluated by Thatcham.
32
3:41 PM Page 32
Off / On
Off/On/Quiet
Off/Ignition/RPM Off/On
Off/On
Off/Ignition
Off/On
Off/On
Off/On
www.directed.com
24-Mar-10