Clifford Concept 650 Owner's Manual page 158

N919730P_01-07.qxd 1/12/07
accessory output b timer duration
Start Timer: Press the
timer duration setting.
Stop Timer: Press the
duration setting, or for maximum time, do not press the
N N O O T T E E : : The timer max setting is 255 seconds.
accessory output c timer duration
Start Timer: Press the
timer duration setting.
Stop Timer: Press the
duration setting, or for maximum time, do not press the
N N O O T T E E : : The timer max setting is 255 seconds.
installer selectable features descriptions - column three
rpm programming
Programs the tachometer input for the BlackJax* and door locks. For more infor-
mation, see programming note #4.
engine type petrol/diesel
This feature applies only if IntelliStart 4 is installed.
Petrol: The IntelliStart will crank the engine three seconds after the ignition is
turned on or after input on the wait-to-start wires ceases.
Diesel: The IntelliStart will crank the engine 20 seconds after it turns the ignition
on and will ignore the wait-to-start input wires.
N N O O T T E E : : RPM must be reprogrammed after changing this feature.
smart windows program
This feature applies only if SmartWindows is installed.
Enter this feature and then follow the programming instructions included with
SmartWindows.
* This feature is not evaluated by Thatcham.
40
3:41 PM Page 40
button; the siren will chirp to signal the start of the
button; the siren will chirp to signal the end of the timer
button; the siren will chirp to signal the start of the
button; the siren will chirp to signal the end of the timer
button.
button.
www.directed.com
24-Mar-10