Clifford Concept 650 Owner's Manual page 212

G426P_2008-08.qxd 8/14/2008 10:57 AM Page 31
: Hand-held, remote control which operates the
Transmitter
various functions of your system.
: This is what happens when the
Trigger or Triggered Sequence
alarm "goes off" or "trips". The triggered response of your system
consists of the siren sounding and parking light flashing for the
programmed duration.
: A small push-button switch mounted somewhere
Valet Switch
inside the vehicle. It is used to override the alarm when a trans-
mitter is lost or damaged, or to enter or exit Valet mode.
Lighter impacts to the vehicle will generate
Warn-Away Response:
the Warning Zone response. It consists of several seconds of siren
chirps and parking light flashes.
: A zone is a separate input that the alarm can recognize as
Zone
unique. Each input to the system is connected to a particular
zone. Two or more inputs often share the same zone.
24-Mar-10
31
© 2008 Directed Electronics All rights reser ved